Analysis and handling of common troubles in pneumatic booster pump
If the pneumatic air booster pump can not operate normally, there are several following possibilities:
污视频带污疼痛的叫声1. drive piston seal wear, leading to the side and bottom side of the piston.
2. the damage of the control valve causes the reversing valve not to work normally.
3. the reversing valve is too dirty, or its seal is damaged, resulting in its inability to move.
污视频带污疼痛的叫声4. the two piston joint is damaged, the pin is dropped, and the two piston rod is misplaced, causing the piston rod to not move.
污视频带污疼痛的叫声5. the leakage of the pressurized cylinder seal.
This kind of pump has a very high operating frequency, but the pressure can not be added, and the noise of the booster pump is also very large. Long-term operation, it is very simple to damage the pump. In the same way, when the outlet pressure of the booster pump is very low, the operation frequency of the booster pump is very high. It will be very high and the booster pump will also be damaged easily.